FACULTY OF ENGINEERING AND TECHNOLOGY

DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING

Overview

Engineering is another Faculty that started at Okija campus with a limited number of
programmes. In 1999, the Faculty of Engineering, Science and Technology had only one
engineering programme which is Electrical/Electronic Engineering. A year after, that is, in the
year 2000, the Department of Food Science and Technology was added. Both Departments
continued until 2004 when the two Departments were relocated to Elele campus together with
other Faculties. Currently, seven Departments make up this Faculty. They are Chemical
Engineering, Petroleum Engineering, Computer Engineering, Mechanical Engineering, Civil
Engineering, Electrical/Electronic Engineering and Food Science Technology. Aside from the
two that commenced at Okija campus, others were established at Elele campus afterwards.

This Department of Electrical/Electronic Engineering in the Faculty of Engineering and
Technology was established in the year 1999 as the pioneer engineering department of Madonna University, Okija, Anambra State, Nigeria. The first set of undergraduates were admitted in 1999 and commenced academic programme as freshmen for the 1999/2000 academic session. On the 14th day of November 2005, the department of Electrical and Electronic Engineering got full accreditation. The status of the department coupled with the evidence of achievements of our graduates and students led to the recommendation for establishment of more departments of Engineering in Madonna University.

The Faculty of Engineering and Technology was later transferred to Elele Campus, Rivers State on the 8th day of September 2004. As at that time, Faculty of Engineering and Technology comprised of two departments, which are; Department of Electrical and Electronic Engineering and the Department of Food Science and Technology. The Faculty was further transferred to Akpugo Campus, Enugu State of Nigeria on 27th day of April 2011. The expectations are that this transfer will offer better accommodation, improve on the rate of development of Faculty of Engineering and multiply interest in engineering research, especially in the field of Electrical and Electronic Engineering.

Today, the department of Electrical and Electronic Engineering is well established and has state–of–the–art equipment in the laboratories and workshops. The Department offers an
undergraduate programme leading to the Bachelor of Engineering (B.Eng) in Electrical and
Electronic Engineering. It is a five-year programme for students admitted through the JAMB
entrance examination and a four-year programme for students admitted through direct entry.
The Department has full accreditation from the NUC and the Council for the Regulation of
Engineering in Nigeria (COREN). The Department is also ready in terms of provision of the
needed materials and human resources for smooth take off of the department’s post graduate
programmes.

The philosophy of the postgraduate programmes in the Department of Electrical/Electronic
Engineering is anchored on developing the student for global competitiveness in the specific
professional area. It is also designed to allow for flexibility, to enable the student to adopt his individual programme to his/her career plans, for employment in academia, private and
international organizations, as well as prepare the student for postgraduate studies and research.
The values of the department includes therefore among others, high academic quality and
institutional discipline, a vibrant and dedicated team, passions for fairness, firmness,
thoroughness and hard work, and reputation for quality of graduates in character and learning.

Objectives of the Programme :

The main objectives of Electrical/Electronic Engineering Programme include:

Areas of Specialization :

The three areas of specialization offered in the department’s post graduate programmes are:

DURATION OF PROGRAMMES

PGD Programme:
      Full-Time: Minimum of 2 Semesters
                   Maximum of 4 Semesters

      Part-Time: Minimum of 4 Semesters
                   Maximum of 6 Semesters

M. Eng. Programme:
      Full-Time: Minimum of 4 Semesters
                  Maximum of 6 Semesters

      Part-Time: Minimum of 6 Semesters
                  Maximum of 8 Semesters

Ph.D. Programme
      Full-Time: Minimum of 6 Semesters
                  Maximum of 10 Semesters

ADMISSION REQUIREMENTS :

The criteria for admission into the PGD programme, Masters Programme (M.Eng.), and  Ph.D. admission are as follows:

(i) All candidates must have five credit passes including English, Mathematics,
Physics, and Chemistry O’ Level.

(ii) Candidates whose CGPA is below 3.00 on a 5.00 scale must possess a B.Sc./B.Eng in Electrical/Electronic Engineering or in the relevant science discipline from Madonna University or an approved University.

(iii) Holders of HND in relevant programmes from approved institutions with a minimum of Upper Credit will be considered for admission. Holders of the HND at lower Units with a minimum of five (5) years post-qualification relevant experience may be considered.

(i) All candidates must have five credit passes including English, Mathematics,
Physics, and Chemistry O’ Level.

(ii) Candidates must possess a B.Sc./B. Eng in Electrical/Electronic Engineering or relevant discipline from Madonna University or any approved University, not below second class Honors Lower Division with at least a CGPA of 3.00 on a 5.00 scale.

(iii) Candidates who possess Second class Lower Division or third class Degree with a CGPA of 1.5-2.99 on a 5.00 scale in Electrical/Electronic Engineering or related areas plus a credit level pass (CGPA of 3.00 on a 5.00 scale) in PGD from Madonna University or any approved University.

In addition candidates may be required if necessary to undergo a selection process, oral or
written

(i) Candidates must have five credit passes including English, Mathematics, Physics, and Chemistry O’ Level.

(ii) Candidates must have Academic Master’s degree in Electrical/Electronic Engineering with a CGPA of 3.5 on a 5.00 scale or an average of 60%, which includes coursework and research thesis.

(iii) In addition to the above criteria, the suitability of a candidate for a Ph.D. admission into the Department will be further assessed through an interview, the performance in which should not be below 60% average. The candidates must demonstrate adequate intellectual capacity, maturity and effective decision making and problem solving potentials.

(iv) Each candidate should also write and submit to the Head of Department at least two weeks to the date of Ph.D. interview, a proposal of his/her intended work.

(v) The programme is open to candidate with M.Phil. from Universities approved by Senate.

All categories of candidates for postgraduate studies in the department must also meet all
other requirements as may be stipulated from time to time by the school of postgraduate studies and the postgraduate admission committee as approved by senate of the university

GRADUATION REQUIREMENTS :

 Indicated below are the detailed graduation requirements for the each proposed programme

A candidate for the Post-Graduate Diploma in Electrical/Electronic will be required to complete
a minimum of 71 units of course work and a design project (Seminar) of 3 units and on
successful completion of the course work and design project (Seminar), will be required to
present and defend a project (6 units). The PGD will be awarded subject to the fulfillment of the
following conditions:
Passing all the examinations in the prescribed course work.
Successful completion of design project.
Successful defense of the project according to the general regulations of the SPGS.

A candidate for the Master of Engineering in Electrical/Electronic Engineering will be required
to complete a minimum of 34 units of course work, a seminar of Dissertation topic presentation
of 1 unit and on successful completion of the course work according to the general regulations of
the SPGS, will be required to present and defend a dissertation (12 units). The M. Eng. will be
awarded subject to the fulfillment of the following conditions:
Passing all the examinations in the prescribed course work. 
Successful presentation of at least one seminar on the project; and
Successful defense of the dissertation according to the general regulations of the SPGS.

Doctorate (Ph.D.) programme is primarily by Research. However, a candidate is required to
take some courses of not more than 24 credit units and present two seminars of 2 credit units each on the proposed topic and progress report on the proposed topic. A Doctoral (Ph.D.) Thesis of 18 credit units MUST be defended before a Panel of Internal and External Examiners.
The degree of Doctor of Philosophy in Electrical/Electronic engineering will be awarded subject to the fulfillment of the following conditions:
Successful completion of the course work of not less than 24 units Presentation of two seminars (2 Units each) on an approved project topic and progress report on the approved topic;
Submission and presentation of a thesis (18 credit load) on an approved project topic and
Passing of oral examination on the thesis according to the general regulations of the
SPGS.

DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING

Madonna University

School of Postgraduate Studies

Address :

1 Madonna University Road
P.M.B 05 Elele,
Rivers State Nigeria.

(Mon - Fri : 08.00-17.00)

Social Info :

1 Madonna University Road
P.M.B 05 Elele,
Rivers State Nigeria.

Contact Us

Get Connected

Get the latest insights and news from the Madonna University School of Postgraduate Studies.

Copyright © 2026 Madonna University School Of Postgraduate Studies